With the addition of an accessory cable (which is not included with the MicroSync™ Kit), the MicroSync™ transmitter and receiver can be used to remotely fire most SLR cameras.

Your SLR camera must have an electronic shutter release input (which most modern, professional cameras have). The SLR camera that you have determines which cable that you need to connect the MicroSync™ receiver to your camera's electronic shutter release input.

Currently, we have camera firing cords available for many Canon and Nikon digital and film SLRs. Click here to see the available MicroSync™ camera firing cords.

Once you obtain the proper cable for your SLR, follow these easy steps:

1. Locate the electronic shutter release input on your camera
2. Plug the corresponding end of the cable into the camera's electronic
3. shutter release input Plug the cable's sub-mini phone plug (2.5mm) into the MicroSync™ receiver output.
4. Holding the transmitter, press the test fire button to fire the camera..

Please Note: For cameras with a "pre-focus" feature, you will need to press the test fire button
for a couple seconds for the camera to focus and then fire.